1.9" Dia. x 12 Ga. Steel Gravity Roller Conveyor


Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

ROLLERS: 1.9" x 12 ga. steel tubing, model 192S, with smooth swaged ends.

FRAMES: Formed steel painted channel 3-1/2" x 1-1/2" x 10 ga. set high; 4-1/2" x 1-1/2" x 10 ga. set low.

ROLLER CAPACITY: 260 lbs. per roller.

FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' centers; 3200 lbs. at 5' centers.

BEARINGS: Integral plain ball bearings, zinc plated, grease packed.

COUPLINGS: Butt type.

AXLES: 7/16" hex shaft, spring loaded.

OPTIONAL FRAME: 4" @ 5.4 lbs. struc. steel channel frame, rollers 3/16" high, may vary due to structural tolerances.

24 Hour Shipments 
Include All 1-Foot Increments  1'- 0" TO 10'- 0" On Straight Sections
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.