796RbF 
  Roller Bed Inclined Floor-To-Floor Belt Conveyor

 

Download Hi-Res Tech Drawings (pdf format)

 
SPECIFICATIONS
BELTING: Black PVC ruff-top.

CARRIER ROLLERS: 1.9" dia. X 16 ga. steel, model 196S.

DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

CENTER DRIVE: Reversible drive with 24" integral belt take-up.

BELT SPEED: 60 FPM, constant.

BED: 7" x 12 ga. channel frame. Bed sections attached with couplings and floor supports.

NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double).

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

FLOOR SUPPORTS: Optional.

ELECTRICAL CONTROLS: Optional.

24 Hour Shipments 
Include All 1-Foot Increments
 10'- 0" TO 50'- 0"
Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

E-mail:  sales@conveyors-inc.com

Phone: (205) 620-4116

CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS
1975 - OVER THIRTY YEARS OF SERVICE - 2006