254S
  2-1/2" Dia. x 14 Ga. Steel Gravity Roller Conveyor

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
ROLLERS: 2-1/2" x 14ga. steel tubing, model 192S, with smooth swaged ends.

FRAMES: Formed steel painted channel 3-1/2" x 1-1/2" x 10 ga. set high; 4-1/2" x 1-1/2" x 10 ga. set low.

ROLLER CAPACITY: 290 lbs. per roller.

FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' centers; 3200 lbs. at 5' centers.

BEARINGS: Integral plain ball bearings, zinc plated, grease packed.

COUPLINGS: Butt type.

AXLES: 7/16" hex shaft, spring loaded.

OPTIONAL FRAME: For structural steel channel frame, see 254S Structural page.
24 Hour Shipments 
Include All 1-Foot Increments  1'- 0" TO 10'- 0" On Straight Sections		 To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.