700BSb 
  Medium Duty Slider Bed Belt Conveyor

 
Download Hi-Res Tech Drawings (pdf format)

 
 
SPECIFICATIONS
BELTING:  PVC-120 black.

DRIVE PULLEY:  4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY:  4" dia., crowned, with 1-3/16" dia. shaft.

END DRIVE:  Allows one-direction (unit) operation; add optional center drive for reversible application.

TAKE-UP:  Screw type unit at tail pulley provides 12" belt take-up.

BED:  7" deep x 12 ga. box type construction.

BEARINGS:  All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED:   60 FPM, constant.

RETURN ROLLERS:  1.9" dia. x 16 ga. steel, model 196S, adjustable.

FLOOR SUPPORTS:  Optional

MOTOR DRIVE:  1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN:  Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ELECTRICAL CONTROLS:  Optional
24 Hour Shipments 
Include All 1-Foot Increments
 5'- 0" TO 100'- 0" 		Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller on (other stationary equipment will require proper guarding and safety devices supplied by others).
E-mail:  sales@conveyors-inc.com

Phone: (205) 620-4116
CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS
1975 - OVER THIRTY YEARS OF SERVICE - 2006