351tcdlrc  
  Heavy Duty Tapered Roller Chain Driven Live Roller Curve

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
TREAD ROLLERS: Heavy duty 11 ga. tapered rollers, model 351T with sprockets, for true taper effect. 

CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.

END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

ROLLER CENTERS: 6" RC measured at outside radius of curve.

SPEED: 35 FPM, constant.

BED: 5" at 6.7 lbs. and 7" at 9.8 lbs. structural steel channel frame.

BEARINGS: Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed.

CHAIN GUARD: The chain drive is enclosed, top and bottom, along the entire length of the conveyor. 

FLOOR SUPPORTS: SH-4 with underneath mounted drive adjustable 19" to 22" TOR. SH-1 with side mounted drive adjustable 11-1/2" to 13" TOR. Supports should be lagged to floor.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).

ELECTRICAL CONTROLS: Optional.

6 WEEK SHIPMENT