|Medium Duty Slider Bed Belt Conveyor|
|Download Hi-Res Tech Drawings (pdf format)|
DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: 60 FPM, constant.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
7" x 12 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33"
BF and above with bed pan braces.
24 Hour Shipments
Include All 1-Foot Increments
5'- 0" TO 100'- 0"
|Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).|
Phone: (205) 620-4116
|CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS 1975 - OVER THIRTY YEARS OF SERVICE - 2006|