700SbF 
  Slider Bed Inclined Floor-To-Floor Belt Conveyor

 
Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
BELTING: Black PVC ruff-top.

DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

CENTER DRIVE: Reversible drive with 24" integral belt take-up.

NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double).

BEARINGS: All pulley bearings are  precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 60 FPM, constant.

BED: 7" x 12 ga. channel frame with 14 ga. slider bed.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

FLOOR SUPPORTS: Optional

ELECTRICAL CONTROLS: Optional
24 Hour Shipments 
Include All 1-Foot Increments
 10'- 0" TO 50'- 0" 		Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller  (other stationary equipment will require proper guarding and safety devices supplied by others).
E-mail:  sales@conveyors-inc.com

Phone: (205) 620-4116
CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS
1975 - OVER THIRTY YEARS OF SERVICE - 2006