725tb 
  Trough Bed Belt Conveyor

 
Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
BELTING:  PVC-120 black. 

DRIVE PULLEY:  4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY:  4" dia., crowned, with 1-3/16" dia. shaft.

END DRIVE:  Allows one-direction (unit) operation; add optional center drive for reversible application.

TAKE-UP:  Screw type unit at tail pulley provides 12" belt take-up.

BEARINGS:  All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS:  1.9" dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED:  60 FPM, constant.

BED:  7" deep x 12 ga. box type bed with bed pan braces (all widths) and with 2-1/2" deep x 12 ga. formed trough with formed flanges on sides to provide extra strength.

FLOOR SUPPORTS: Optional

MOTOR DRIVE:  1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN:  Drive pulley is drivenby No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ELECTRICAL CONTROLS:  Optional
24 Hour Shipments 
Include All 1-Foot Increments
 5'- 0" TO 100'- 0" 		Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
E-mail:  sales@conveyors-inc.com

Phone: (205) 620-4116
CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS
1975 - OVER THIRTY YEARS OF SERVICE - 2006