751rb 
  Heavy Duty Roller Bed Belt Conveyor

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
BELTING:  PVC-120 black.

CARRIER ROLLERS:  2-1/2" dia. x 11 ga. steel, model 251S.

DRIVE PULLEY:  8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both crowned and fully lagged.

TAIL PULLEY:  4" dia. with1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both crowned.

RETURN ROLLERS:  1.9" dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED:  35 FPM, constant.

END DRIVE:  Allows one-direction (unit) operation; add optional center drive for reversible application.

TAKE-UP:  Screw type unit at tail pulley provides 12" belt take-up.

BED:  7" x 10 ga. channel frame. Bed sections attach with couplings and floor supports.

BEARINGS:  All pulley bearings are  precision, heavy duty, lubricated, ball bearing units with cast iron housings.

FLOOR SUPPORTS:  Optional

SQUARING RODS:  Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.

ROLLER CHAIN:  Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

MOTOR DRIVE:  1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ELECTRICAL CONTROLS:  Optional

24 Hour Shipments 
Include All 1-Foot Increments
 5'- 0" TO 100'- 0"
Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

E-mail:  sales@conveyors-inc.com

Phone: (205) 620-4116

CONVEYOR SYSTEMS, STORAGE SYSTEMS AND COMPONENTS
1975 - OVER THIRTY YEARS OF SERVICE - 2006