796LSC
  Line Shaft Driven Curve Module

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
TREAD ROLLERS: 2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T.

DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft, located on inside radius. NOTE: Spools are keyed to provide positive drive (designed not to slip on drive shaft).

COUPLINGS: Couplings located both ends (type "A") or one end only (type "B" or "C").

TANGENTS: 1'-0" both ends on 60 and 90; 1'-6" both ends on 30 and 45. 1'-0" infeed, 1'-0" discharge and no center tangent on 180. Tangent roller centers 3" RC.

BEARINGS: Precision, lubricated, ball bearing units with steel housings. 6 per 90 and 60 curve; 4 per 45 and 30.

UNIVERSAL JOINTS: 4 per 90 and 60 curve; 2 per 45 and 30 curve.

FLOOR SUPPORTS: SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.

BED: 7" x 1-1/2" x 12 ga. formed steel channel frame.

MOTOR DRIVE: Driven by 796LS.

24 Hour Shipments 
Include 30, 45, 60 And 90 Modules