Line Shaft Gate Module


Download Hi-Res Tech Drawings (pdf format)
Download catalog page in pdf format
TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S grooved.

DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft.

COUPLINGS: Couplings located on horizontal section only.

LIFT: Gas cylinder provides assist for raising/lowering.

BEARINGS: Precision, lubricated, ball bearing units with composite housings.

BED: 4-1/2" x 1-1/2" x 10 ga. formed steel channel frame on actual lift gate; 7" x 1-1/2" x 12 ga. on 2' horizontal section.

FLOOR SUPPORTS: SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.

MOTOR DRIVE: Unit is designed to be driven by 796LS. 

SPECIFY HAND: Specify if gate is left hand or right hand.