Ball Transfer Units


Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

BALL ASSEMBLIES: 1" dia. steel ball x 1-13/16" overall housing diameter. Mounting bolt is 1/4"-20.

BALL CAPACITY: 50 lbs. per ball with max. unit load not to exceed the capacity of 4 balls (200#).

FRAMES: 3-1/2" x 1-1/2" x 10 ga. steel with balls in set high position (1/4" above side frames) only. 

FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' ctrs; 3200 lbs. at 5' ctrs.

PLATES: Balls are attached in square pattern to 10 ga. formed plates up to 39" BF. Above 39", plates are 7 ga.

COUPLINGS: Butt type.

24 Hour Shipments 
Include All 1-Foot Increments
 1'- 0" TO 10'- 0"
On Ball Transfers
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.