ct380/ct360  
  90 3-Strand Chain Transfer

 

Download Hi-Res Tech Drawings (pdf format)
Download catalog page in pdf format
 
SPECIFICATIONS
TRANSFER ARM: 7 ga. formed channel.

TRANSFER CHAIN: No. 80 (model CT380) or no. 60 (model CT360) riveted roller chain.

STANDARD LENGTHS: 3', 4', 5', 6', 7' and 8' unit lengths.

CHAIN CENTERS: 18"

CHAIN TAKE-UP: Screw Type.

END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.

LIFT: Pivot type.

BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.

CHAIN SPEED: 35 FPM constant.

FLOOR SUPPORTS: Integral part of unit, with adjustment of 18" to 20" top of chain (down position).

MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 4000 lbs.

AIR CONTROLS: Air chambers with single solenoid valve.

CUTOUTS: Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also.

ELECTRICAL CONTROLS: Optional.

4 WEEK SHIPMENT