|Series 400 Heavy Duty Plastic Belt Conveyor|
|Download Hi-Res Tech Drawings (pdf format)|
Series 400 flat top gray polypropylene belt, FDA approved belt.
DRIVE SPROCKETS: 10.1" pitch dia. with 2.5" square bore.
TAIL SPROCKETS: 10.1" pitch dia. with 2.5" square bore.
END DRIVE: Allows one-direction (unit) operation.
BED: 7" x 1-1/2" x 7 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
TAKE-UP: Catenary type located at discharge end.
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
Drive and tail shaft bearings are precision, heavy duty, lubricated, ball
bearing units with cast iron housings.
35 FPM, constant.
|3 WEEK SHIPMENT||To prevent pinch points that exist when belt conveyors are permanently attached to other conveyors, use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).|