Lowered Height (inches): 9.5

Vertical Travel (inches): 18.5

Raised Height (inches): 28

Weight (lbs.): 420

 Virtually eliminate lifting, bending, and stretching the primary causes of back injury. This simple, auto-matic unit is ideal for most applications. It incorporates a turntable to allow nearside loading and a system of springs and shock absorbers which lower and raise the unit, as pallets are built up and broken down, to maintain a constant working height. No power or air supply is required. Pallet loads to 4,500 lbs can be handled. Rugged tubular steel frame for loads to 4500 lbs. Heavy-duty springs calibrated to bring pallet to most convenient loading and unloading height. Proven linkage design maintains level under uneven loading. Dampener provides smooth, gradual raising and lowering action without overshoot or spring bounce. Low-friction bearing- supported turntable for near-side loading and unloading. Phenolic frame cover (optional). Fork pockets for relocation by fork truck also extend base for free standing stability Leveling feet (optional) allow use on sloping or uneven floors. Free standing, can be easily relocated by fork truck.