ppf 
  Series 900 Flat Top Plastic Belt Parts Conveyor w/ Flights

2" Streamline Flights

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
BELTING: Series 900 flat top gray polypropylene belt with 2" high streamline flights on 11.9" centers, FDA approved belting.

DRIVE SPROCKETS: 4.1" pitch dia. with 1.5" square bore.

TAIL SPROCKETS: 4.1" pitch dia. with 1.5" square bore.

END DRIVE: Allows one-direction (unit) operation.

TAKE-UP: Catenary type, underneath mounted.

BEARINGS: Drive shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 35 FPM, constant.

BED: 8" deep x 10 ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan.

INCLINE: 30, 36 and 45° (specify).

PORTABLE SUPPORT: Adjustable floor supports with 4" dia. casters & bracing.

ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ELECTRICAL CONTROLS: Optional.

3  WEEK SHIPMENT To prevent pinch points that exist when belt conveyors are permanently attached to other conveyors, use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).