rbt3  
  3-Strand 90 Round Belt Transfer

 

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

 
SPECIFICATIONS
TRANSFER ARM: 10 ga. formed channel.

TRANSFER BELT: 3/8" dia. round polyurethane belt.

LENGTHS: Transfer designed to mount in 796LS line shaft conveyors 15"-39" BF.

BELT CENTERS: 12"

ONE DIRECTION FLOW: Transfers product in one direction.

TAKE-UP: Adjustable sheaves provides take-up of transfer belt.

BEARINGS: Heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: Driven at 150% of speed as powered section transfer is mounted in.

LIFT: 3/4" positive lift.

MOTOR DRIVE: Optional.

CAPACITY: 100 lbs.

AIR CONTROLS: Air cylinder with single solenoid valve.

FLOOR SUPPORTS: Transfer is designed to attach to 796LS/738LS conveyors w/ mounting hardware integral feature of transfer.

NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.

3 WEEK SHIPMENT